. To get the most out of your purchase, be sure to read this manual carefully. Radio interference also may cause problems with The watch receives the time calibration signal automatically up to 6 times a day 5 times a day for the Chinese calibration signal. Learning to program and use the Casio Wave Ceptor is simple, leaving you plenty of time for the more important things in life. Use of the wrong type of battery can damage the watch.
After the time is set, press the upper left button to exit the digital time setting function. This indicates that you are in analog time setting mode. Once the analog time is set, press the upper left button to exit the analog time setting mode. Other city codes are not affected. When the hour is set, press the lower left button to switch to minutes, and use the same commands to change the minutes unit. Accurate timekeeping and handy features like an alarm, stopwatch and countdown timer make the Casio Wave Ceptor watch a great gift for yourself or another. To advance the hour, press the lower right button repeatedly until the correct hour is displayed.
When this occurs, you need to set the analog time. Setting of the date by the time calibration signal cannot be performed starting from January 1, 2100. The instructions are too long to write here but if you haven't go the instructions, you can get them by going to the Casio web site. It is also used to advance the flashing when setting the time, data and alarm functions. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every five minutes, until you turn the alarm off.
If the watch Press D. If you need to make a big change to the analog time, press and hold the lower right button to make the hands move faster. The Casio Wave Ceptor digital and analog wristwatches are equipped with sensors that receive regular updates to ensure that the time displayed on your watch is always correct. Read the required number off the back of your watch and enter it into the search box. About the Author Megan Mattingly-Arthur has been writing professionally since 1998. Every time you press the button, the analog time will advance 20 seconds.
Keep the watch exposed to bright light The electricity generated by the solar cell of the watch is Bright Light stored by a rechargeable battery. After about two Swapping your Home City and World Time City seconds, the display will change to the current time in that city. You can also se the hand to agree with the digital clock. To set the analog time, press the lower left button 6 times. You will need a pdf reader on your pc, you will find all instructions in there.
This section illuminate the face of the watch for easy reading in the also explains how to manually set the current date and time. To set the digital time, press and hold the upper left button until the seconds starts blinking. Next, press and hold the upper left button until the digital time starts to blink. If you need to move the hours unit backwards, press the middle right button until the correct hour is displayed. Analog time adjustment is completed using the lower right button. To get the most out of your watch in the dark can cause the battery to run down, which will result in some purchase, be sure to read this manual carefully.
The hours unit will start blinking. . . . . . .
. . . . . . .