Other than pointing me to config manuals which I'm reading , can anyone please help me configure this switch so that I can seamlessly bring it inline into my network? Configuration on the device Assign 1. To delete a file in the recycle bin, execute the reset recycle-bin command in the directory to which the file originally belongs. To use the feature, you assign ports to a port isolation group. The Marker protocol can be employed to quickly redistribute service traffic within link aggregation groups and ensure the orderly transmission of data frames. To execute the command indicated by the keyword, enter the complete keyword. They do not exist as physical entities on devices.
We're moving into the H3Cs now. Required Enter Layer 2 Ethernet interface Use either command. Those made in Layer 2 aggregate interface view take effect on the current aggregate interface and all the member ports in the aggregation group. Required Specify the command level of authorization-attribute level By default, no command level is configured for the local user level the local user. Configuring load sharing for link aggregation groups Configuring load-sharing criteria for link aggregation groups You can determine how traffic is load-shared across a link aggregation group by configuring load-sharing criteria.
Startup configuration loading process Figure 31 shows the configuration loading process during startup. Configuration procedure Follow the step below to configure the device to log in to a telnet server as a telnet client: To do…. The entire network contains only one root bridge. Move Your Career Forward with certification training in the latest technologies. Get answers and train to solve all your tech problems - anytime, anywhere. They are very different from the way Cisco and Procurves are configured.
Saving the running configuration Introduction To make configuration changes take effect at the next startup of the device, save the running. Ctrl+F Moves the cursor one character to the right. The access ports are configured as edge ports to allow rapid transition. We are migrating from a flat 10. This is the mode when you use the save command without the safely keyword.
Part number: 5998-1800 Software version: Release 2208 Document version: 5W100-20110530 Legal and notice information © Copyright 2011 Hewlett-Packard Development Company, L. The configuration procedure is omitted. So in this case you have tagged for Voip and untagged for data. By default, you can log in to the device through the console port without authentication and have user privilege level 3 after login. Multi-port loops might also cause broadcast storms. The device displays cable test results within five seconds.
Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform. A prompt such as appears after you input the password and username and press Enter. Remarks Enter system view system-view — Enter Ethernet interface view or Layer 2 interface interface-type Enter interface aggregate interface interface-number Required or port group view Use either command. For example, if a patch file has three patch units, they are numbered as 1, 2, and 3 respectively. Enter port group view To configure jumbo frame support on a group of Ethernet interfaces, enter port group view. Y is a reverse mask turn on sflow: more complicated.
I am replacing an old Linksys switch that could barely function doing the vlans, but I plugged this one in with this config and I get nothing. You can either use a router that understands vlans then create a tagged port between the switch and the router, or use a router with 2 interfaces and plug the interfaces into two untagged ports. In addition, automatic saving of the running configuration is performed periodically, while manual saving can immediately save the running configuration. Square brackets enclose syntax choices keywords or arguments that are optional. Now there is one caveat to this. As a result, often a customer network consists of parts located at different sides of the service provider network.
Stand Out as the employee with proven skills. Display the global link-aggregation load-sharing criteria on Device A. The end goal here is for any device on an vlan to be able to access each other. I also need to know how to properly configure - in the procurve parlance - tagged and untagged ports. The following table lists telnet login configurations for different authentication modes.
Square brackets enclose syntax choices keywords or arguments that are optional. Ctrl+D Deletes the character at the current cursor position. Display the current working directory. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Required When you create a Layer 2 Create a Layer 2 aggregate.