Turn the bulb base counterclockwise. Failure to do so may result in death or serious injury. The shift range can be selected by the shift lever. The Harrier replaces the long wheelbase model in Japan, previously called Vanguard. Before driving Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load: Capacity and distribution Cargo capacity depends on the total weight of the occupants.
Select a 4 to 8-digit passkey using the knob. For lens repair, contact your Toyota dealer. Doing so may cause a fire or other incident which may result in death or serious injury. The gross combination weight is the sum of the total vehicle weight including the occupants, cargo and any optional equipment installed on the vehicle and the weight of the trailer being towed including the cargo in the trailer. Open the rear door from outside and then unlock the child-protector lock.
Contact your Toyota dealer for further information about additional requirements such as a towing kit, etc. Temporary condensation build-up on the inside of the headlight lens does not indicate a malfunction. Driving procedures Engine ignition switch vehicles without a smart key system Starting the engine Check that the parking brake is set. Steps to take in an emergency Follow the correction procedures. Open the cover and connect the portable audio device.
Turning the engine off while driving will not cause loss of steering or braking control, but the power assist to these systems will be lost. The Automatic High Beam indi- cator will turn off and the high beam indicator will turn on. Make sure the top tether strap is securely latched. Changing engine switch modes Modes can be changed by pressing the engine switch with the brake pedal released. Press and hold the button to display the remaining texts.
The hood will pop up slightly. Pull the hood lock release lever. Wipe away the water immediately to prevent it from freezing. The cooling system may be under pressure and may spray hot coolant if the cap is removed, causing serious injuries, such as burns. For safe use Fastening the seat belt for the rear center seat Press the plate to release, and then pull the seat belt.
Side extender if equipped : Place in side position then slide backwards. Down Push the head restraint down while pressing the lock release button. Check that the shift lever is set in P. Using the driving support systems The Blind Spot Monitor function The Blind Spot Monitor function uses radar sensors to detect vehicles that are traveling in an adjacent lane in the area that is not reflected in the outside rear view mirror the blind spot , and advises the driver of the vehicles existence via the outside rear view mirror indicator. After installing the connector, shake the bulb base gently to check that it is not loose. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Adjust to the ideal position by moving the steering wheel hori- zontally and vertically. Shift the shift lever to P. Hold the steering wheel and press the lever down. Ask your Toyota dealer for details. Do-it-yourself maintenance Remove the air conditioning fil- ter and replace it with a new one. Ask your Toyota dealer for details.
Turn clockwise to increases the temperature and turn counterclockwise to decreases the temperature. Contact your Toyota dealer for further details. The cooling system may be under pressure and may spray hot coolant if the cap is removed, causing serious injuries, such as burns. Remove the mud, snow or sand from around the stuck tire. Specifications Light bulbs Light bulbs Bulb No. Take extra care when connecting the battery if the engine switch mode prior to discharge is unknown.